Home Energy Systems Customer Portal
One of the major concerns of homeowners who wish to get solar panels installed, is deciding which type of panels to buy. If you have ever looked into buying solar panels you may have heard of the terms mono crystalline, poly crystalline and thin film solar panels, but maybe you did not really understand what exactly distinguishes one form another. So, we are here to help you understand the basic differences among the three different types of solar panels and help you zero in on the one that best suits your needs and requirements.
A typical mono crystalline solar cell is a dark black colored cell which is also known as single crystalline silicon cells. It can be distinguished from the other kinds of cells in the fact that the corners of the cell are rounded due to the physical properties of cylinder shaped mono crystalline silicon, and the surface is highly uniform. In addition to this, the production process ensures that the side corners of the composite silicon ingots are further cut off to optimize the panel performance and save on energy dissipation. Since the mono crystalline solar cells are composed of highest purity silicon, they possess superior rates of efficiency as compared to the other kinds of cells. Furthermore, these cells are more long lasting and space efficient than poly crystalline and thin film solar panels, but are significantly higher on the price range.
Launched back in the year 1981, the polycrystalline solar cells also referred to as multi crystalline silicon or poly silicon cells were the first solar cells to be developed independent of the Czochralski process. The production process involves melting of raw silicon under high temperatures and pouring them into square shaped molds. The cooled silicon is then retrieved from the mold and sliced off into wafers. Poly crystalline solar cells are simpler and more cost effective to produce, and have a higher temperature resistance as compared to mono crystalline cells.
Also known as thin film photovoltaic cells or TFPV the thin film solar cells are manufactured by deposition of multiple thin layers of PV or photovoltaic material onto a substrate. Depending upon the type of PV material being used, the TFPVs can be broadly classified into four separate categories namely, amorphous silicon, organic photo voltaic cells, copper indium gallium selenide or cadmium telluride. One of the major advantages of the TFPVs is that it is easier and more cost effective in terms of manufacture on a bulk scale. In addition to this, they are also more appealing in an aesthetic sense and can be highly flexible too. Since they require a lot of space for installation, TFPVs are not that suitable for domestic purposes. They also come with typically shorter warranty periods due to their shorter life spans.
Below is a chart that breaks down the main difference in the three solar cell types.
Now that you have a broad idea about the three types of solar cells, you can go for the one that best serves your purpose and is light on your pocket. If your interested in learning more about solar, or seeing the different types of solar panels in person check out the H.E.S. Energy Showroom & Design Center.
To set and maintain high industry standards in customer service and workmanship while providing the best quality, renewable solar energy solutions.